![]() ![]() To go back to Serato, twist the selector knobs to LINE.Ĭonnect both PLX-1000 turntables with RCA cables to Inputs 1 and 4 on your SL4. To use backup mode, all you would have to do is twist the selector knobs on top of channels 2 and 3 of your mixer to CD/LINE. On the front of your Rane SL4, make sure that the switches for 2 and 3 are set to LINE, not PHONO.Ĭonnect both CDJ-2000nxs decks (for regular CD player/USB stick backup mode) with RCA cables directly to the CD/LINE jacks on CH 2 and CH 3 on the DJM-900nexus (NOT YOUR RANE SL4). On your Rane SL4, connect the RCA cables from OUTPUT 2 and OUTPUT 3 to the line jacks on CH 2 and CH 3 on your DJM-900nxs. Set up your CDJ-2000nxs players as DECKS 2 and 3 in Serato. I would suggest dedicating the fastest USB port for only the SL4 (usually the port closest to the front of the MacBook). I would suggest using a solid USB hub for the CDJs and any extra USB drives. So yes, THREE USB cables to your MacBook. Connect your SL4 with a USB cable to your MacBook to unlock the software. I would also suggest using Rekordbox to import your music files into your USB sticks.Ĭonnect both CDJ-2000nxs decks (for HID controller mode) with USB cables to your MacBook. Just remember, if you do use USB sticks, use FAT not NTSB. As regular CD/USB players, you are effectively eliminating Serato and your laptop from your setup at the moment (giving you the time to reboot if you wish). As regular CD/USB players, they would be your backups and connect directly to your mixer using RCA cables. As HID controllers, the CDJs would utilize the USB cables to directly control your software. ![]() Or are you just using two decks with the software, and the other decks as backup?įrom what I figure, you would be screwed anyway because you have to activate THRU in the software.Ĭonnect both of your CDJs as both HID controllers and regular CD/USB players. If you are trying to accomplish that with all four decks (both CDJs and PLXs), then that is impossible without the theoretical and nonexistent Rane SL8 (because you would need an additional four channels to act as your dedicated THRU-puts).Īre you using both CDJ-2000nxs and both PLX-1000s as four separate decks in your software (for example, CDJs as channels 2 and 3, PLXs as channels 1 and 4)? That video link you mentioned shows how to use the four channels in the Rane SL4 for only TWO decks using all four channels, with channels 1 and 2 going to your software (REL or ABS mode) and channels 3 and 4 as your dedicated THRU-puts. Are you using Serato Scratch Live or Serato DJ? ![]()
0 Comments
Leave a Reply. |